Search


Advanced search

Active participation in the Discussion Forum requires a currently paid membership to the MCA or one of its local Chapters. Contact your Board Members with questions.
Massey Talk Discuss Massey related topics, Q&A, mechanical problems, etc.
Massey Discussion Forums :: Massey Talk :: help with seal for 444 View modes: 
User avatar
Posted: 3/6/2012 4:25:18 PM
   

help with seal for 444

I have a 444 standard that has a bad seal on the hydraluic lever on the operators platform I went to the local agco dealer and the seal is not available.  anyone know where I can get one the size out of the massey ferguson book says it is for a 15/16 shaft outside dimension is 1 and 3/16 and 1/8th deep.  thanks


| | |
User avatar
Posted: 3/6/2012 5:48:37 PM
   

RE:help with seal for 444

Call Lloyd Robbins as he can point you in the right direction. 785-229-5530


| | |
User avatar
Posted: 3/11/2012 2:03:57 PM
   

RE:help with seal for 444

if  you go to parts store like weaver, napa, carquest,  they should be able to get you the seal with the sizes you gave.  also a company by the name of motion industries  (all they do is seals and bearings) has a website that you can pick the size that works for you, call them and its ordered.  good luck


| | |
User avatar
Posted: 3/11/2012 4:33:33 PM
   

RE:help with seal for 444

The Seal that cross's over from the size you listed is SKF or CR  # 711811  If you have trouble finding one email me  tlkessel@embarqmail.com     I don't stock that size but I'll see if I can find one for you.
Terry Kessel  


| | |
User avatar
Posted: 3/13/2012 7:51:24 PM
   

RE:help with seal for 444

Thanks alot that is whats great about the great website you guys have built.  so much help at the touch of a few keys thanks they do have it so the project goes on,  thanks again


| | |
1