Massey Discussion Forums > Massey Talk > help with seal for 444
Order posts by: 

help with seal for 444

I have a 444 standard that has a bad seal on the hydraluic lever on the operators platform I went to the local agco dealer and the seal is not available.  anyone know where I can get one the size out of the massey ferguson book says it is for a 15/16 shaft outside dimension is 1 and 3/16 and 1/8th deep.  thanks

RE:help with seal for 444

Call Lloyd Robbins as he can point you in the right direction. 785-229-5530

RE:help with seal for 444

if  you go to parts store like weaver, napa, carquest,  they should be able to get you the seal with the sizes you gave.  also a company by the name of motion industries  (all they do is seals and bearings) has a website that you can pick the size that works for you, call them and its ordered.  good luck

RE:help with seal for 444

The Seal that cross's over from the size you listed is SKF or CR  # 711811  If you have trouble finding one email me  tlkessel@embarqmail.com     I don't stock that size but I'll see if I can find one for you.
Terry Kessel  

RE:help with seal for 444

Thanks alot that is whats great about the great website you guys have built.  so much help at the touch of a few keys thanks they do have it so the project goes on,  thanks again